Well_Test_Stage

[Columns] [Composed Of] [Referenced By] [Refers To]

Name	Well_Test_Stage
Entity Type	Table
Description	An individual, discrete event or period during a well test. Examples are blowdown, flowing, shut-in, etc. Some of the properties of the recovered fluid are also stored here.
Submodel	Well_Testing
Entity Scope	Project
Primary Key	Id
Natural Key	Well_Test_Id , Stage_Number , Existence_Kind , Version
Generalizations	Wellsite_Activity , Activity , Entity , IT_Object , Tracked_Object
Specializations

Columns

[Previous] [Next] [Top]

Name	Value Domain / Measurement	Description	Required / Default	Type
Activity_Program_Id	Activity_Program	Reference to the program during which the activity was performed.	No	NUMBER(38)
Activity_State	STRING64 NA	The current state, or status, of the activity. Activity state is a refinement of the lifecycle indicator Existence_Kind. For example, a drilling job whose Existence_Kind is "Actual" could have an activity state of "turning to the right", "suspended due to weather", or "tool makeup or breakdown". An activity whose Existence_Kind is "Required" could have State values like "under investigation", "proposed" and "AFE approved". Note: The valid list of activity states will vary from one kind of activity to another, so the values entered into this column are not validated via a lookup table.	No	VARCHAR2(64)
Activity_Template_Id	Activity_Template	The Activity is an activation of, and is characterized by the associated Activity_Template.	No	NUMBER(38)
Average_BH_Pressure	double Pressure	The average of all the pressures measured at the bottomhole.	No	NUMBER
Average_BH_Temperature	double Temperature	The average of all the temperatures measured at the bottomhole.	No	NUMBER
Average_Casing_Pressure	double Pressure	The average of all the pressures measured between the casing and test tool (measured at the surface after a well has been shut in).	No	NUMBER
Average_Casing_Temperature	double Temperature	The average of all the temperatures measured at the area between the casing and the test tool.	No	NUMBER
Average_Flow_Rate	double Flowrate	The average flow rate of the reservoir fluid during the well test stage. I.e., the flow into the separator.	No	NUMBER
Average_Hydro_Pressure	double Pressure	The average normal, predicted pressure for a given depth, or the pressure exerted per unit area by a column of freshwater from sea level to a given depth	No	NUMBER
Average_Tubing_Pressure	double Pressure	The average of all the pressures measured within the tubing.	No	NUMBER
Average_Tubing_Temperature	double Temperature	The average of all the temperatures measured within the tubing.	No	NUMBER
BSW	double Percent	The percentage of Basic Sediment and Water in the flow stream. BSW is material coexisting with, yet foreign to, petroleum liquid. This foreign material includes free water and sediment and/or emulsified water and sediment.	No	NUMBER
Base_Interval_MD	double Depth	Base depth of the interval being tested in the stage.	No	NUMBER
Bottom_Hole_Choke_Size	double Cylinder_Diameter	The diameter of the choke at the bottomhole.	No	NUMBER
Bottom_Hole_Choke_Size_UOM	R_Unit	The unit of measure in which the bottom hole choke will be stored.	No	VARCHAR2(64)
CGR	double Liquid_To_Gas_Ratio	The ratio of condensate volume to gas volume in the flow stream.	No	NUMBER
Casing_Choke_Size	double Cylinder_Diameter	The diameter of the choke at the casing.	No	NUMBER
Casing_Choke_Size_UOM	R_Unit	The unit of measure in which the casing choke will be stored.	No	VARCHAR2(64)
Duration	double Time	This is the duration of the well test stage. This is required when all that is known about a well test stage is the start date of the stage and the duration of the stage.	No	NUMBER
End_Date	DATE NA	The date and time at which the activity will end or did end. For planned activities, this would be expected end date.	No	DATE
Existence_Kind	REF_EXISTENCE_KIND NA	A reference value that describes the state of existence in the lifecycle of the entity, for example, Planned, Predicted, Required, Simulated, and Actual.	Yes Actual	VARCHAR2(64)
External_Reference	STRING64 NA	A value that is used by an external organization to reference this activity. For example, if an external organization is hired to perform this activity, this column could be used to store the work order or purchase order number that organization uses to reference this activity.	No	VARCHAR2(64)
Final_BH_Pressure	double Pressure	The final pressure measured at the bottomhole.	No	NUMBER
Final_BH_Temperature	double Temperature	The final temperature measured at the bottomhole.	No	NUMBER
Final_Casing_Pressure	double Pressure	The final pressure measured between the casing and test tool (measured at the surface after a well has been shut in).	No	NUMBER
Final_Casing_Temperature	double Temperature	The final temperature measured of the area between the casing and the test tool.	No	NUMBER
Final_Flow_Rate	double Flowrate	The final flow rate of the reservoir fluid during the well test stage. I.e., the flow into the separator.	No	NUMBER
Final_Fluid_Level	double Depth	The final fluid level in the tubing	No	NUMBER
Final_Hydro_Pressure	double Pressure	The final normal, predicted pressure for a given depth, or the pressure exerted per unit area by a column of freshwater from sea level to a given depth	No	NUMBER
Final_Tubing_Pressure	double Pressure	The final pressure measured within the tubing.	No	NUMBER
Final_Tubing_Temperature	double Temperature	The final temperature measured within the tubing.	No	NUMBER
Fluid_State_Code	R_Fluid_State	The Fluid State of the material at the time of the fluid recovery. This is defines as being the temperature and pressure state of a fluid (e.g., standard, dewpoint, and reservoir)	No	VARCHAR2(64)
GLR	double Gas_To_Liquid_Ratio	The ratio of gas volume to liquid volume in the flow stream.	No	NUMBER
GOR	double Gas_To_Liquid_Ratio	The ratio of gas volume to oil volume in the flow stream.	No	NUMBER
GUID	STRING128 NA	Globally Unique IDentifier for an instance of a class. This GUID is not generated by the database, but is the GUID used by the application on first access of this object. Use of this property is optional and completely under the control of application developers.	No	VARCHAR2(128)
Id	ID No_Unit	Unique identifier for this entity.	Yes	NUMBER(38)
Initial_BH_Pressure	double Pressure	The initial pressure measured at the bottom hole.	No	NUMBER
Initial_BH_Temperature	double Temperature	The initial temperature measured at the bottom hole.	No	NUMBER
Initial_Casing_Pressure	double Pressure	The initial pressure measured between the casing and test tool (measured at the surface after a well has been shut in).	No	NUMBER
Initial_Casing_Temperature	double Temperature	The initial temperature measured at the area between the casing and the test tool.	No	NUMBER
Initial_Flow_Rate	double Flowrate	The initial flow rate of the reservoir fluid during the well test stage. I.e., the flow into the separator.	No	NUMBER
Initial_Fluid_Level	double Depth	The initial fluid level in the tubing	No	NUMBER
Initial_Hydro_Pressure	double Pressure	The initial normal, predicted pressure for a given depth, or the pressure exerted per unit area by a column of freshwater from sea level to a given depth	No	NUMBER
Initial_Tubing_Pressure	double Pressure	The initial pressure measured within the tubing.	No	NUMBER
Initial_Tubing_Temperature	double Temperature	The initial temperature measured within the tubing.	No	NUMBER
Insert_Date	DATE NA	Date the entity was created in the repository	No	DATE
Insert_User	STRING64 NA	The name of the user responsible for the creation of this entity in the repository.	No	VARCHAR2(64)
Internal_Reference	STRING64 NA	A value that is used internally within the organization to reference this activity.	No	VARCHAR2(64)
Name	ENTITY_NAME NA	The name given to any object or data item, e.g. Name of Well, Name of Field, etc.	No	VARCHAR2(255)
Orifice_Size	double Cylinder_Diameter	The size of the constriction (orifice plate) present in a gas meter when the well test was recorded.	No	NUMBER
Original_Source	STRING64 NA	The name of the person, Organization or project source that originally provided this entity, e.g. "IHS-EnergyData" or "FinderUpper Stratton Deeper Pool 15"	No	VARCHAR2(64)
Produced_By	STRING64 NA	ID of the activity that was executing when the entity was created, for data created programmatically.	No	VARCHAR2(64)
Produced_GLR	double Gas_To_Liquid_Ratio	The ratio of (Total Gas Volume - Gas Lift Injected) to Total Liquid Volume in the flow stream.	No	NUMBER
Produced_GOR	double Gas_To_Liquid_Ratio	The ratio of (Total Gas Volume - Gas Lift Injected) to Total Oil Volume in the flow stream.	No	NUMBER
Productive_Duration	double Time	The amount of time the specified material was being produced during the well test stage	No	NUMBER
Purpose	STRING255 NA	A description of purpose of the activity or its stage	No	VARCHAR2(255)
Remarks	STRING2000 NA	Any type of remarks added to an entity instance.	No	VARCHAR2(2000)
SDAT_Label	int No_Unit	Label used by the security system for entitlements. SDAT is Secure Data Access Technology.	No	NUMBER(10)
Sand_Cut	double High_Concentration	The ratio of sand volume to total liquid in the flow stream. It is normally defined as Sand/Total Fluid Volume.	No	NUMBER
Separator_Choke_Size	double Cylinder_Diameter	The diameter of the choke at the separator.	No	NUMBER
Separator_Choke_Size_UOM	R_Unit	The unit of measure in which the separator choke will be stored.	No	VARCHAR2(64)
Source	STRING64 NA	Name of the person or organization responsible for this entity"s E and P content and quality. Not the data technologist or IT expert creating the entity, for which see IT_Object.Insert_User and Update_User.	No	VARCHAR2(64)
Stage_Number	int No_Unit	A non-intelligent sequence number that identifies this test stage within a well test.	Yes	NUMBER(10)
Start_Date	DATE NA	The date and time at which the activity will start or did start. For planned activities, this would be expected start date.	No	DATE
Stroke_Rate	double Frequency	The pumping stroke rate. Describes as strokes per minute. This is a denormalization of data that is usually stored in the Pumping_Unit_Oper_Pty_Set class	No	NUMBER
Time_Offset	double Time	The time offset from the start of the program that this activity is scheduled to start at. This is normally used while planning a job.	No	NUMBER
Time_To_Surface	double Time	The amount of time from the initiation of the well test stage for the reservoir fluid recovered to reach the surface.	No	NUMBER
Top_Interval_MD	double Depth	Top depth of the interval being tested in the stage.	No	NUMBER
Transient_Period	R_Transient_Period	Indicates whether the activity is executed daily, monthly, on demand, etc.	No	VARCHAR2(64)
Triggering_Event_Id	Event	The identifier of the event that triggered the start of this activity. Events can trigger activities. For example, an explosion event could trigger a firefighting activity. Note that this value should not conflict with, or be confused with, the value in Activity_Status.Triggering_Event.	No	NUMBER(38)
Tubing_Choke_Size	double Cylinder_Diameter	The diameter of the choke at the wellhead.	No	NUMBER
Tubing_Choke_Size_UOM	R_Unit	The unit of measure in which the tubing choke will be stored.	No	VARCHAR2(64)
Update_Date	DATE NA	Date of the most-recent modification to the entity.	No	DATE
Update_User	STRING64 NA	The name of the user responsible for the last modification to this entity.	No	VARCHAR2(64)
Version	STRING255 NA	The form or variant of the entity.	Yes 1	VARCHAR2(255)
WCR	double Liquid_To_Liquid_Ratio	The ratio of water volume to condensate volume in the flow stream.	No	NUMBER
WGR	double Liquid_To_Gas_Ratio	The ratio of water volume to gas volume in the flow stream.	No	NUMBER
WOR	double Liquid_To_Liquid_Ratio	The ratio of water volume to oil volume in the flow stream.	No	NUMBER
Water_Cut	double Liquid_To_Liquid_Ratio	The ratio of water volume to total liquid volume in the flow stream. It is normally defined as Water/(Water + Oil).	No	NUMBER
Well_Test_Id	Well_Test	The identifier of the well test to which this stage belongs.	Yes	NUMBER(38)
Well_Test_Stage_Type	R_Well_Test_Stage	A value that represents the type of well test stage. Examples are Shut-in, Blowdown, flowing, etc.	Yes	VARCHAR2(64)

Referenced By

[Previous] [Next] [Top]

From Entity	Link	Description	Implementation Technique	Required
Fluid_Sample	Well_Test_Stage	The identifier of the well test stage that may have been used to acquire the fluid.	Cascade	No
Production_Test_DOV	Well_Test_Stage	READ ONLY: Unique identifier for the Well Test Stage.	Cascade	No
Well_Test_Fluid_Recovery	Well_Test_Stage	The identifier of the well test stage during which the fluid was recovered.	Cascade	Yes
Well_Test_Interpretation	Well_Test_Stage	The identifier of the well test stage whose data is being interpreted via this interpretation. An analysis can be performed either for a well test or a well test stage.	Nullify	No
Well_Test_Site	Well_Test_Stage	The identifier of the well_test_stage for which the site(s) is being defined.	Cascade	No
Well_Test_Trace	Well_Test_Stage	The identifier of the well test stage during which the trace measurements were recorded.	Cascade	No

Refers To

[Previous] [Next] [Top]

Link	To Entity	Description	Implementation Technique	Required
Activity_Template	Activity_Template	_	Restrict	No
Transient_Period	R_Transient_Period	_	Restrict	No
Bottom_Hole_Choke_Size_UOM	R_Unit	The unit of measure in which the bottom hole choke will be stored.	Restrict	No
Casing_Choke_Size_UOM	R_Unit	The unit of measure in which the casing choke will be stored.	Restrict	No
Fluid_State_Code	R_Fluid_State	The Fluid State of the material at the time of the fluid recovery. This is defines as being the temperature and pressure state of a fluid (e.g., standard, dewpoint, and reservoir)	Restrict	No
Separator_Choke_Size_UOM	R_Unit	The unit of measure in which the separator choke will be stored.	Restrict	No
Activity_Program	Activity_Program	_	Restrict	No
Well_Test	Well_Test	The identifier of the well test to which this stage belongs.	Cascade	Yes
Well_Test_Stage_Type	R_Well_Test_Stage	A value that represents the type of well test stage. Examples are Shut-in, Blowdown, flowing, etc.	Restrict	Yes
Super_Activity	Activity	_	Assoc to One	No
Fulfilled_Activity	Activity	_	Assoc to Many	No
Triggering_Event	Event	_	Nullify	No
Tubing_Choke_Size_UOM	R_Unit	The unit of measure in which the tubing choke will be stored.	Restrict	No

[Seabed Objects] [Entities in Schema Seabed] [Index]

Well_Test_Stage

Copyright © 2009 Schlumberger. All rights reserved.