Fluid_State_Pty_Set

[Columns] [Composed Of] [Referenced By] [Refers To]

Name	Fluid_State_Pty_Set
Entity Type	Extension of Fluid_Sample
Description	The fluid properties recorded during a particular fluid analysis that are dependent on the pressure and the temperature state of the fluid.
Submodel	Fluid_Analysis
Entity Scope	Project
Primary Key	Id
Natural Key	Fluid_Sample_Id , Material_Type , Pressure , Temperature , Fluid_State_Code , Fluid_Analysis_Id , Fluid_Analysis_Stage_Id , Existence_Kind , Version
Generalizations	IT_Object , Tracked_Object
Specializations

Columns

[Previous] [Next] [Top]

Name	Value Domain / Measurement	Description	Required / Default	Type
API_Oil_Gravity	double API_Oil_Gravity	API gravity of Oil. The measure of the density of liquid petroleum products; derived from relative density in accordance with the following equation: API Gravity at 60 degrees F = [141.5 /relative density at 60 degrees F] - 131.5. API Gravity is expressed in degrees API, 10 degrees API being equivalent to 1.0, the relative density of water."	No	NUMBER
Compressibility	double Compressibility	Indicates the change in bulk volume as a function of change in confinement pressure for the material.	No	NUMBER
Corrected_GCR	double Gas_To_Liquid_Ratio	The corrected gas condensate ratio for the sample.	No	NUMBER
Cricondentherm	double Temperature	The maximum temperature at which a liquid phase can exist in a multi-phase fluid system.	No	NUMBER
Cumulative_Specific_Gravity	double Dimensionless	The specific gravity of the gas that has been liberated since the start of the analysis.	No	NUMBER
Dead_Oil_Gravity	double API_Oil_Gravity	The API gravity of the oil at sufficiently low pressure that it contains no dissolved gas or a relatively thick oil or residue that has lost its volatile components.	No	NUMBER
Density	double Density	The density of the sample.	No	NUMBER
Dissolved_Gas_Volume	double Volume	The amount of gas that is dissolved in the sample.	No	NUMBER
Dissolved_Solid_Volume	double Volume	The amount of solid material that is dissolved in the sample.	No	NUMBER
Electric_Conductivity	double Conductivity	A measure of the electric conductivity of the sample (1/resistivity).	No	NUMBER
Electric_Resistivity	double Resistivity	A measure of the electric resistivity of the sample.	No	NUMBER
Equilibrium_Ratio	double Dimensionless	The equilibrium vaporization ratio: ratio of the mole fraction of a fluid system component in the vapor phase divided by the mole fraction of the same component in the liquid phase. [Finder]	No	NUMBER
Existence_Kind	REF_EXISTENCE_KIND NA	A reference value that describes the state of existence in the lifecycle of the entity, for example, Planned, Predicted, Required, Simulated, and Actual.	Yes Actual	VARCHAR2(64)
Fluid_Analysis_Id	Fluid_Analysis	The fluid analysis that resulted in these fluid "state" properties being recorded.	No	NUMBER(38)
Fluid_Analysis_Stage_Id	Fluid_Analysis_Stage	The fluid analysis stage that resulted in these fluid "state" properties being recorded.	No	NUMBER(38)
Fluid_Color	CODE NA	The color of the fluid.	No	VARCHAR2(64)
Fluid_Sample_Id	Fluid_Sample	The identifier of the fluid sample described by this set of fluid properties.	Yes	NUMBER(38)
Fluid_State_Code	R_Fluid_State	The temperature and pressure conditions associated with the fluid analysis measurements. (i.e. Standard, Dew point, Reservoir).	Yes	VARCHAR2(64)
Formation_Volume_Factor	double Liquid_To_Liquid_Ratio	The ratio of the volume of fluid under reservoir conditions compared with the volume under standard temperature and pressure conditions.	No	NUMBER
GCR	double Gas_To_Liquid_Ratio	The ratio of gas volume to condensate volume.	No	NUMBER
GOR	double Gas_To_Liquid_Ratio	The Gas to Oil Ratio.	No	NUMBER
GUID	STRING128 NA	Globally Unique IDentifier for an instance of a class. This GUID is not generated by the database, but is the GUID used by the application on first access of this object. Use of this property is optional and completely under the control of application developers.	No	VARCHAR2(128)
Gas_Expansion_Factor	double Dimensionless	Y Factor. The factor that accounts for the change in gas density due to pressure changes, as across an orifice. This factor is the ratio of the upstream density divided by the downstream density.	No	NUMBER
Heat_Capacity	double Heat_Capacity	The amount of heat required to change the temperature by one degree.	No	NUMBER
Id	ID No_Unit	Unique identifier for this entity.	Yes	NUMBER(38)
Insert_Date	DATE NA	Date the entity was created in the repository	No	DATE
Insert_User	STRING64 NA	The name of the user responsible for the creation of this entity in the repository.	No	VARCHAR2(64)
Kinematic_Viscosity	double Flowrate_Per_Length	The dynamic viscosity of the fluid divided by the density of the fluid.	No	NUMBER
Material_Type	R_Production_Material	The material whose state properties are being measured.	No	VARCHAR2(64)
PVT_Correlation_Name	STRING64 NA	The name of the PVT correlation used. Examples are Peng Robinson or SRK or Standing and Lasseter. This is only valid if the properties in this table are calculated rather than measured.	No	VARCHAR2(64)
Plastic_Viscosity	double Dynamic_Viscosity	The tangential shearing force (in excess of the yield point value) required to induce a unit rate of shear in the material. It assumes that the material obeys the Bingham law of plastic flow. A newtonian fluid has a yield point value of zero. if a Fann viscometer is used then this could be quoted, in units of centipoise (cP), as the 600 rpm reading - 300 rpm reading.	No	NUMBER
Pressure	double Pressure	The pressure of the fluid sample whose properties are being analyzed.	No	NUMBER
Produced_By	STRING64 NA	ID of the activity that was executing when the entity was created, for data created programmatically.	No	VARCHAR2(64)
Remarks	REMARKS_STR NA	A general description or remark of the state dependent properties of a fluid analysis.	No	VARCHAR2(999)
Retrograde_Volume	double Volume	The volume of the condensed fluid that remains in the reservoir. Used for Retrograde Condensation. It is expressed as a percentage of the hydrocarbon pore space.	No	NUMBER
Retrograde_Volume_Factor	double Dimensionless	The ratio of the volume of the retrograde fluid under reservoir conditions compared with the volume under standard temperature and pressure conditions.	No	NUMBER
SDAT_Label	int No_Unit	Label used by the security system for entitlements. SDAT is Secure Data Access Technology.	No	NUMBER(10)
Shrinkage_Factor	double Dimensionless	The ratio of the volume of fluid under standard temperature and pressure conditions compared with the volume under reservoir conditions. The reciprocal of formation volume factor.	No	NUMBER
Solubility	double Dimensionless	The relative amount of a solid substance which will dissolve into aqueous ions at their standard states of unit molality. This is based on the Gibbs free energy of formation of the solid and aqueous ionic forms of the chemical compound. [Finder]	No	NUMBER
Solubility_GOR	double Gas_To_Liquid_Ratio	The solubility of gas in oil.	No	NUMBER
Specific_Gravity	double Dimensionless	The ratio of the weight of a given volume of the material at a given temperature to the weight of an equal volume of a standard substance at the same temperature. In determining the specific gravity of gases, the comparison is made with the standard of air or hydrogen.	No	NUMBER
Specific_Heat_Mass	double Heat_Capacity	The quantity of heat needed to raise the temperature of a unit mass of the substance by one degree Celsius.	No	NUMBER
Specific_Heat_Mole	double Heat_Capacity	The quantity of heat needed to raise the temperature of one mole of the substance by one degree Celsius.	No	NUMBER
Specific_Heat_Volume	double Heat_Capacity	The quantity of heat needed to raise the temperature of unit of volume of the substance by one degree Celsius.	No	NUMBER
Steam_Quality	double Dimensionless	The mass fraction of water in the vapor phase with respect to the total mass of water in both the vapor and liquid phases.	No	NUMBER
Surface_Tension	double Force_Per_Length	The amount of energy that is stored at the surface of the sample	No	NUMBER
Temperature	double Temperature	The temperature of the fluid sample whose properties are being analyzed.	No	NUMBER
Thermal_Conductivity	double Thermal_Conductivity	The heat flux or thermal energy per unit length and temperature. The capacity of the material to conduct or pass thermal energy.	No	NUMBER
Thermal_Diffusivity	double Thermal_Diffusivity	The rate at which heat is conducted through a material. It is a measure of transient heat flow and is defined as the thermal conductivity divided by the product of specific heat times density.	No	NUMBER
Update_Date	DATE NA	Date of the most-recent modification to the entity.	No	DATE
Update_User	STRING64 NA	The name of the user responsible for the last modification to this entity.	No	VARCHAR2(64)
Vapor_Pressure	double Pressure	The pressure of the vapor over a liquid at equilibrium.	No	NUMBER
Version	STRING255 NA	The form or variant of the entity.	Yes 1	VARCHAR2(255)
Viscosity	double Dynamic_Viscosity	A measure of the resistance of the sample to flow.	No	NUMBER
Volumetric_Therm_Expansion	double Dimensionless	The relative change in volume of the material due to a change in the temperature under isobaric conditions.	No	NUMBER
Yield_Stress	double Shear_Stress	Resistance to initial flow; the stress required to start fluid movement. Specifically, shear stress at 0 shear rate for Bingham Plastic (BP) theological model, otherwise named Bingham yield value or yield point.	No	NUMBER
Z_Factor	double Dimensionless	Gas deviation factor. The ratio of the actual volume of a gas from at specific temperature/pressure to the volume of the gas calculated by the ideal gas law. It is defined by the real (non-ideal) gas equation of state, pV = znRT.	No	NUMBER
pH	double Dimensionless	Indicates the degree of acidity of the material. A value of 7 denotes a neutral fluid, lower values correspond to acidic fluids and higher values to basic fluids	No	NUMBER

Referenced By

[Previous] [Next] [Top]

From Entity	Link	Description	Implementation Technique	Required
Gas_Fluid_Analysis_DOV	Fluid_State_Pty_Set	READ ONLY: Unique identifier for the Fluid State Property Set.	Cascade	No
Oil_Fluid_Analysis_DOV	Fluid_State_Pty_Set	READ ONLY: Unique identifier for the Fluid State Property Set.	Cascade	No
Production_Test_DOV	Fluid_State_Pty_Set	READ ONLY: Unique identifier for the fluid property set.	Cascade	No

Refers To

[Previous] [Next] [Top]

Link	To Entity	Description	Implementation Technique	Required
Fluid_Analysis_Stage	Fluid_Analysis_Stage	The fluid analysis stage that resulted in these fluid "state" properties being recorded.	Nullify	No
Fluid_State_Code	R_Fluid_State	The temperature and pressure conditions associated with the fluid analysis measurements. (i.e. Standard, Dew point, Reservoir).	Restrict	Yes
Fluid_Analysis	Fluid_Analysis	The fluid analysis that resulted in these fluid "state" properties being recorded.	Nullify	No
Material_Type	R_Production_Material	The material whose state properties are being measured.	Restrict	No
Fluid_Sample	Fluid_Sample	The identifier of the fluid sample described by this set of fluid properties.	Cascade	Yes

[Seabed Objects] [Entities in Schema Seabed] [Index]

Fluid_State_Pty_Set

Copyright © 2009 Schlumberger. All rights reserved.