| Name | ESP_Motor |
|---|---|
| Entity Type | Table |
| Description | Entity describing the motor of an ESP |
| Submodel | Artificial_Lift |
| Entity Scope | Project |
| Primary Key | Id |
| Natural Key | |
| Generalizations | ESP_Component , Tracked_Facility , Facility , Entity , IT_Object , Tracked_Object |
| Specializations |
| Name | Value Domain / Measurement | Description | Required / Default | Type |
|---|---|---|---|---|
| Address_Id | Address |
The address of the Tracked Facility | No |
NUMBER(38) |
| Assembly_Coating | CODE NA |
Coating that can be ordered for ESP devices | No |
VARCHAR2(64) |
| Catalog_Cost | double No_Unit |
The catalog cost of the piece of equipment or facility expressed in the currency denoted by the attribute Catalog_Currency | No |
NUMBER |
| Catalog_Currency | R_Currency |
The currency in which the catalog cost is expressed. | No |
VARCHAR2(64) |
| Catalog_Number | STRING64 NA |
A catalog or part number for a facility. | No |
VARCHAR2(64) |
| Configuration_Type | CODE NA |
Configuration code, for example "FL-CT". | No |
VARCHAR2(64) |
| ESP_Motor_Cat | R_ESP_Motor_Cat |
Reference to the catalog entry for this device | No |
NUMBER(38) |
| Engineering_Code | STRING128 NA |
A code containing concatenated attributes of equipment. The structure will vary with each equipment type. | No |
VARCHAR2(128) |
| Existence_Kind | REF_EXISTENCE_KIND NA |
A reference value that describes the state of existence in the lifecycle of the entity, for example, Planned, Predicted, Required, Simulated, and Actual. | Yes Actual |
VARCHAR2(64) |
| Facility_Equipment_Flag | CODE NA |
A flag to denote whether a given facility should be treated as a facility (F), a piece of equipment (E) or both (B). A facility labeled as F represents a role (e.g. ESP) played by physical piece(s) of equipment and would not have attributes like serial number, manufacturer etc. It can be related to the physical pieces(s) of equipment using Facility_Composition. The individual physical pieces can be replaced if they need to be, without changing the facility. A Facility labeled as E represents a physical piece of equipment (e.g. Drill Pipe) which is normally used in the context of an activity and would not be permanently installed. A facility labeled as B represents both a physical piece of equipment as well as the role played by it. If this kind of Facility is connected in the network and stops working and needs to be replaced, then all connections to this Facility are expired and new connections are made to the replacement facility. | No |
VARCHAR2(64) |
| GUID | STRING128 NA |
Globally Unique IDentifier for an instance of a class. This GUID is not generated by the database, but is the GUID used by the application on first access of this object. Use of this property is optional and completely under the control of application developers. | No |
VARCHAR2(128) |
| Housing_Metallurgy | CODE NA |
The metallurgy of the Housing of an ESP component. | No |
VARCHAR2(64) |
| Id | ID No_Unit |
Unique identifier for this entity. | Yes |
NUMBER(38) |
| Insert_Date | DATE NA |
Date the entity was created in the repository | No |
DATE |
| Insert_User | STRING64 NA |
The name of the user responsible for the creation of this entity in the repository. | No |
VARCHAR2(64) |
| Inventory_Id | STRING64 NA |
The formal identification for a piece of equipment, a serial number or inventory ID | No |
VARCHAR2(64) |
| Length | double Length |
Length of ESP Component | No |
NUMBER |
| Lubrication_Description | CODE NA |
Short Description of Motor Lubrication | No |
VARCHAR2(64) |
| Manufacture_Date | DATE NA |
Date of manufacturing the facility. | No |
DATE |
| Manufacturer | STRING64 NA |
Name of the business associate who manufactured the item. | No |
VARCHAR2(64) |
| Material_Type | STRING64 NA |
The primary material type of facility. | No |
VARCHAR2(64) |
| Model_Name | STRING64 NA |
Name of a model or version of some entity; for equipment, it may coincide with the trade name. | No |
VARCHAR2(64) |
| Motor_Type | CODE NA |
A classification to identify a major grouping of ESP motors, for example "SK", "SX". | Yes |
VARCHAR2(64) |
| Name | ENTITY_NAME NA |
The name given to any object or data item, e.g. Name of Well, Name of Field, etc. | No |
VARCHAR2(255) |
| Original_Source | STRING64 NA |
The name of the person, Organization or project source that originally provided this entity, e.g. "IHS-EnergyData" or "FinderUpper Stratton Deeper Pool 15" | No |
VARCHAR2(64) |
| Outer_Diameter | double Cylinder_Diameter |
Outer Diameter of Motor Unit | No |
NUMBER |
| Pothead_Type | CODE NA |
The type of connector between the motor and the power cable/motor lead. | No |
VARCHAR2(64) |
| Produced_By | STRING64 NA |
ID of the activity that was executing when the entity was created, for data created programmatically. | No |
VARCHAR2(64) |
| Rated_Current | double Electric_Current |
Current Rating of Motor Unit | No |
NUMBER |
| Rated_Frequency | double Frequency |
Frequency Rating of Motor Unit | No |
NUMBER |
| Rated_HP | double NA |
The mechanical horsepower rating of the motor | No |
NUMBER |
| Rated_SHP | double NA |
Shaft Horsepower Rating for an ESP Component. | No |
NUMBER |
| Rated_Voltage | double Electric_Potential |
Voltage Rating of Motor Unit | No |
NUMBER |
| Remarks | STRING2000 NA |
Any type of remarks added to an entity instance. | No |
VARCHAR2(2000) |
| Rotor_Count | double No_Unit |
The number of rotors in an ESP Motor. Note: This number can also hold fractions. | No |
NUMBER |
| SDAT_Label | int No_Unit |
Label used by the security system for entitlements. SDAT is Secure Data Access Technology. | No |
NUMBER(10) |
| Serial_Number | STRING64 NA |
The serial number placed on a piece of equipment. | No |
VARCHAR2(64) |
| Series_Name | CODE NA |
ESP Component Series Number | No |
VARCHAR2(64) |
| Shaft_Metallurgy | CODE NA |
The metallurgy of the shaft | No |
VARCHAR2(64) |
| Shaft_Size | double Cylinder_Diameter |
Cylinder diameter of a shaft used in ESP Component. | No |
NUMBER |
| Shaft_Type | CODE NA |
The type of shaft fitted to the component. Examples would be "Standard" and "High Strength" shaft | No |
VARCHAR2(64) |
| Source | STRING64 NA |
Name of the person or organization responsible for this entity"s E and P content and quality. Not the data technologist or IT expert creating the entity, for which see IT_Object.Insert_User and Update_User. | No |
VARCHAR2(64) |
| Stator_Winding_Code | CODE NA |
The definition of the Stator winding for an ESP Motor, for example "0050", "0070" | No |
VARCHAR2(64) |
| Trim_Type | CODE NA |
The trim code for ESP Component. | No |
VARCHAR2(64) |
| Update_Date | DATE NA |
Date of the most-recent modification to the entity. | No |
DATE |
| Update_User | STRING64 NA |
The name of the user responsible for the last modification to this entity. | No |
VARCHAR2(64) |
| Vendor_Id | Company |
The company from which the facility was purchased. | No |
NUMBER(38) |
| Version | STRING255 NA |
The form or variant of the entity. | Yes 1 |
VARCHAR2(255) |
| Weight | double Force |
Weight of an ESP Component. | No |
NUMBER |
| From Entity | Link | Description | Implementation Technique | Required |
|---|---|---|---|---|
| ESP_Motor_Oper_Pty_Set | ESP_Motor | The ESP Motor to which these operating properties belong | Cascade | Yes |
| Link | To Entity | Description | Implementation Technique | Required |
|---|---|---|---|---|
| ESP_Motor_Cat | R_ESP_Motor_Cat | Reference to the catalog entry for this device | Restrict | No |
| Catalog_Currency | R_Currency | _ | Restrict | No |
| Vendor | Company | _ | Nullify | No |
| Address | Address | _ | Nullify | No |